Manteision cerbydau trydan pur fel a ganlyn:
1: I fabwysiadu dyluniad newydd sbon, lefel uchel o ddeallusrwydd, gall y lefel uchaf o yrru awtomatig gyrraedd L4;
2: Gyriant trydan pur, modur cydamserol magnet parhaol o ansawdd uchel neu fodur asyncronig AC, ansawdd sefydlog, effeithlonrwydd gwaith perffaith;
3: Mae'r ffynhonnell bŵer yn fath o fatri lithiwm dibynadwy a sefydlog neu fatri ffosffad haearn lithiwm, gan ddefnyddio brandiau adnabyddus byd-eang neu Tsieineaidd, fel CATL, BYD, CALB, a Lishen, ac ati, yn ddiogel ac yn ddibynadwy, yn hirhoedlog Bywyd, hyd at 5000-10000 cylch;
4: Modd Codi Tâl AC Safonol a Modd Codi Tâl Cyflym DC, y gellir ei wefru gartref neu mewn pentyrrau codi tâl cyhoeddus. Cyfleus a chyflym. Mabwysiadu tair safonau codi tâl mawr y byd GBT, yn ddiogel ac yn ddibynadwy;
5: Cerbydau trydan pur, teithio sy'n gyfeillgar i'r amgylchedd, yn wyrdd ac yn rhydd o lygredd, yn ddiogel ac yn arbed ynni.
|
Model
|
MN5180DFBEV
|
|
Chassis model
|
EQ1180GEVJ5
|
|
Fuel type
|
All-electric
|
|
Drive motor model
|
TZ370XS-LKM1103
|
|
Motor rated power/engine speed/torque（kW/r/min/N.m）
|
80/1270
|
|
Motor peak power/engine speed/torque（kW/r/min/N.m）
|
1100/4500
|
|
Power battery type
|
Lithium iron phosphate battery
|
|
Power battery manufacturer
|
CATL
|
|
The energy density of power battery （W·h/kg）
|
140
|
|
Total capacity of energy storing device（kWh）
|
218.55
|
|
Driving mileage（km）
|
250
|
|
GVW(kg)
|
18000
|
|
Curb weight(kg)
|
10150/10450
|
|
Rated loading mass(kg)
|
7655/7355
|
|
Dimension(Length /Width／Height)(mm)
|
8670×2510×3150
|
|
Chassis Manufacturer
|
Dongfeng
|
|
Wheelbase(mm)
|
5300
|
|
Front /rear suspension(mm)
|
1430/1940
|
|
Approach angle(°)
|
16
|
|
Departure angle(°)
|
13
|
|
Maximum travel speed(km/h)
|
100
|
|
Unloading Cycle Time(s)
|
≤70
|
|
Lifting Device Cycle Time(s)
|
≤24
|
|
Garbage Tank Volume(m³)
|
≥13.5
|
|
Garbage Tank Available Volume(m³)
|
≥10.5
|
|
Sewage Tank Volume(m³)
|
≥0.55
|
|
Clean Water Tank Volume(m3)
|
≥0.4
|
|
High-pressure Washer Model/Working Pressure(MPa)
|
Heimao FLM0719/4MPa
|
|
Hydraulic System Maximum Pressure(MPa)
|
16
|
|
Air Conditioning
|
Warm/Cold
|
|
Main performance description
|
¿ It adopts a special tailgate anti-drip device to accept the swill that leaks when it is not sealed. The structure is simple, environmentally friendly, and safe.
¿Equipped with a tailgate safety brace device, when the rear door is opened for maintenance, the safety brace will be propped up to prevent the tailgate from accidentally falling and improve safety.
¿Equipped with sewage collection, discharge, and flushing devices, which can initially realize solid-liquid separation, collect and discharge excess sewage, and can also connect an external fire hydrant pipe to flush the sewage tank, which is environmentally friendly and safe, and improves the loading capacity and maintainability
¿The rear door cylinder seat is arranged vertically, which is convenient for installation and maintenance, and the sequence valve is used to realize the opening and closing sequence of the rear door and the latch, which is reliable in action and reduces costs.
¿The right side of the box is equipped with hanging bucket, pressing bucket and supporting bucket structure, lifting frame main rail and auxiliary rail, which can lift 120, 240 liters of standard trash cans, the friction is small during the rising process, and the lifting mechanism does not open during the linear motion process , The action is smooth, safe and reliable; the lifting mechanism and the upper cover form a linkage mechanism (national patent technology) through the connecting rod and the swing arm, which not only saves costs, but also improves work efficiency.
¿The tilting angle of the trash can and the height of the tooth plate from the ground can be adjusted by the angle adjustment mechanism (national patent technology) at the upper end of the lifting rail and the adjustable connecting rod, so as to avoid the garbage can not dump due to the insufficient tilting angle of the trash can Clean problem, strong compatibility, lower production requirements
|
|
Tank material and Work Flow
|
¿All stainless steel materials
¿The overall frame structure, large curved side arc box body
¿Convex arc rear door, strong resistance to deformation,
¿Long service life, strong loading capacity
|
|
Anti-rust related processes
|
¿Before welding, all parts should not stick to water, and there should be no rust marks andrust marks;
¿The inner side of each reinforcing rib (channel steel, etc.) and the base metal welding position must be coated with anti-rust primer (grass green epoxy primer);
¿Reinforcing ribs such as square pipes must be fully welded with sealing plates on both sides;
¿Use ordinary welding wire for welding;
¿20mm on the left and right sides of the welding position must be cleaned before welding;
¿After welding, the slag and spatter around the weld must be removed;
¿After the welding is completed, the whole vehicle is sprayed with paint;
|
Contact Now
